Performing the sequential/self-timer shooting
Adjust settings for burst or self-timer photography. Choose an option according to your subject.
Fix the camera securely on a tripod for self-timer shooting.
Press the
g
Y
button.
Rotate the front or rear dial to select a value.
Custom self-timer options can be viewed by pressing the INFO button.
F
Single
Single-frame advance. The camera takes one photo
each time the shutter button is pressed all the way
down.
i
Sequential High
The camera takes photos at up to about 10 fps while
the shutter button is held all the way down. Focus,
exposure, and white balance are locked at the values
for the first shot in each series.
h
Sequential Low
The camera takes photos at up to about 6 fps while
the shutter button is held all the way down. You can
choose the frame advance rate and the maximum
number of shots in each series (
exposure conform to the options selected for
. If [C‑AF]
or [C-AF+TR] is selected for [
K
AF Mode], the
camera will focus before each shot.
j
Y
12sec
The shutter is released 12 s after the shutter button
is pressed all the way down. The self-timer lamp will
light for about 10 s and then start to flash about
2 s before the shutter is released. The camera focuses
when the shutter button is pressed halfway.
k
Y
2sec
When the shutter button is pressed all the way down,
the self-timer lamp will start to flash and a photo will
be taken after about 2 seconds. The camera focuses
when the shutter button is pressed halfway.
101
Performing the sequential/self-timer shooting
C
1.
2.
