Sleep Mode
If no controls are used for a set period, the camera will automatically enter suspend operation to
reduce the drain on the batteries. This is referred to as “sleep mode”.
When the camera enters sleep mode, the monitor will turn off and operation will be suspended.
Pressing the shutter or
q
button reactivates the camera.
If no operations are performed for a set period after the camera enters sleep mode, the camera will
turn off automatically. The camera can be reactivated by turning it on again.
The camera may require additional time to recover from sleep mode when [On] (enabled) is
selected for [Wi-Fi/Bluetooth Settings] > [Power-off Standby].
g
The delay before the camera goes to sleep or turns off automatically can be selected in the
C
Custom Menu. At default settings, the camera will go to sleep after one minute and turn off
automatically after four hours.
g
> [Sleep], [Auto Power Off] (P. 296)
33
Turning the camera on
C
C
