88
88
Eyepiece
8
9
Hand switch
Light source
Polarizer
Analyzer
Filters
Light guide
Power cord
Revolving nosepiece
Microscope frame
MX63L-F
MX63-F
(Transmitted light
illumination unit)
Brightfield
objective adapter
Brightfield/
darkfield
objective
Brightfield/darkfield
objective
MIX slider for reflected light
observation
DIC slider
Breath shield
10
Assembly
10-1 Assembly diagram
The numbers in the following diagram represent the order to attach each unit.
The units shown in the diagram are typical units. For units which are not described below, contact Olympus or refer to the
latest catalogs.
Before assembling the microscope, remove dust and dirt from the mount of each unit and assemble carefully
to prevent from scratches.
The procedures to assemble the units shown by
numbers are described on the next page and after.
Assemble the units using the Allen screwdriver (opposite side: 3 mm
) and the Allen wrench (opposite side: 3mm
) provided with the microscope frame. Do not use the Allen wrench for purposes other than attaching the stage.
NOTE
TIP
Observation tube
Digital camera
Camera adapter
1
2
3
4
5
7
Light sources other than LED
(See page 92.)
Holders
(See page 14, 15)
Stage
Intermediate
attachment
Including transmitted
light illumination unit
6
Tools (provided with microscope frame)
Allen screwdriver (3 mm)
Allen wrench (3 mm)
Tool holder
Reflected LED
lamp housing
10
12
Summary of Contents for MX63
Page 15: ...9 MX63 MX63L 9 MX63L installation space Unit mm ...
Page 27: ...21 MX63 MX63L 21 Memo ...
Page 119: ......