Olympus Magna-Mike 8600, User Manual

Page: 84 / 186

DMTA-10026-01EN, Rev. D, January 2015
Chapter 4 74
4.6 Calibration Frequency
You should perform a calibration:
• Daily or at the start of a work session
• When changing to a different target ball size
86ACC-PR3-KIT
[Q7800005]
Low-profile probe
calibration kit 1.59 mm (1/16 in.),
3.18 mm (1/8 in.),
and 0.66 mm
(0.026 in.)
diameter target
wire 86CAL-PR3-TB1,
86CAL-PR3-TB2,
86CAL-PR3-TW2,
80TB1, 80TB2, 86TW2,
86CAL-PR3-010,
86CAL-PR3-020,
86CAL-PR3-040,
86CAL-PR3-080,
86CAL-PR3-120, and
86CAL-PR3-160 in a
plastic case.
86ACC-W-KIT
(U8771070)
Wire target calibration
kit for applications
requiring a wire target
max range up to
12.70 mm (0.500 in.) 1.14 mm
(0.045 in.) and
0.66 mm
(0.026 in.)
diameter target
wire 86CAL-TW1, 86TW1,
86TW2, 86WCAL-010,
86WCAL-020,
86WCAL-040,
86WCAL-080,
86WCAL-160,
86WCAL-240,
86WCAL-360, and
86WCAL-500 in a
plastic case.
80CAL-NIS
(U8771011)
NIST calibration
Standards Kit does not
include any balls,
disks, or wire
targets. A complete set of six
Magna-Mike calibration
standards traceable to
NIST for applications
where thicknesses are
up to 6.10 mm
(0.240 in.). The
certificate of calibration
is also included.
Table 7 Calibration kits (continued)
Part number Description
Targets included
in kit
Items included in kit