DMTA-10026-01EN, Rev. D, January 2015
Chapter 7
124
Figure 7-9 Opening a file
7.3.2
Copying a File
You can duplicate a file that already exists in the datalogger. The file copy function is
useful when you need to create a new file with the exact same ID number structure as
a previously created file. You can also choose to copy the thickness data.
The file copy only allows you to copy an existing file within the internal memory. Use
the file
EXPORT
function to copy data between the internal memory and the
removable microSD card.
To copy a file
1.
In the measurement screen, press
[FILE]
, and then select
COPY
.
2.
In the
FILE
COPY
screen (see Figure 7-10 on page 125), highlight the desired
source file in the list, and then press
[ENTER]
.
a)
In the
COPY NAME
field, enter the name of the destination file.
b)
Set
COPY THICKNESS DATA?
to
YES
when you want to also copy the
thickness readings from the original file into the new file.
3.
Select
COPY
to return to the measurement screen.
Summary of Contents for Magna-Mike 8600
