manualshive.com logo in svg

Olympus IPLEX NX IV9000N, Instructions Manual

Share
Download
Olympus IPLEX NX IV9000N Instructions Manual Download Page 41

33

IPLEX NX

3-7  Connecting the remote control unit to the main unit

Remove the remote control unit in the reverse order of the connection procedures.

 

· Do not apply an excessive force to the connection section while the remote 

control unit is connected to the main unit.

 

· Be sure to turn OFF the power before removing or attaching the remote control unit.

Otherwise, the instrument may be damaged.

NOTE

 Removing the remote control unit

Store the remote control unit in the remote control unit 
holder.

 Storing the remote control unit

Remove the remote control unit connector cap of the main unit. Then, insert the connec-
tor of the remote control unit to the connector of the main unit, and rotate the connector 
of the remote control unit clockwise to connect the remote control unit.

Remote control unit 

connector cap

If necessary, attach the insertion tube 
grip to the remote control unit and put the 
insertion tube through the insertion tube 
grip. Grasping the insertion tube grip to-
gether with the remote control unit allows 
you to hold the insertion tube securely.

TIP

6-mm insertion 

tube

Insertion tube grip

4-mm insertion 

tube

Summary of Contents for IPLEX NX IV9000N





























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands