manualshive.com logo in svg

Olympus IPLEX NX IV9000N, Instructions Manual

Share
Download
Olympus IPLEX NX IV9000N Instructions Manual Download Page 118

110

This product may include (i) open source software; and (ii) other software whose source code 
is intentionally published (collectively, hereinafter referred to as “OSS”).

The OSS included in this product shall be licensed and distributed to you subject to the terms 
and conditions applied to the OSS. Please see such terms and conditions of the OSS in the 
following URL. The copyright owners of the OSS are listed in the following URL.

THERE IS NO WARRANTY FOR THE OSS, TO THE EXTENT PERMITTED BY APPLICABLE 
LAW. THE OSS “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED 
OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS 
TO THE QUALITY AND PERFORMANCE OF THE OSS IS WITH YOU. SHOULD THE OSS 
PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR 
CORRECTION.

Some of the OSS licenses associated with this product may permit you to obtain source 
code for certain software which Olympus has an obligation to provide in accordance with the 
terms and conditions applied to the OSS. You may obtain a copy of this source code from 
the following URL. This offer is valid for a period of three (3) years from the date of original 
purchase. Olympus has no responsibility to provide any source code except the source code 
for certain software.

http://www.olympus-ims.com/rvi-products/iplex-nx/oss-license/

You shall not inquire information relating to the source codes obtained in the above URL from 
Olympus.

THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR 
THE PERSONAL AND NONCOMMERCIAL USE OF A CONSUMER TO (i) ENCODE 
VIDEO IN COMPLIANCE WITH THE AVC STANDARD (“AVC VIDEO”) AND/OR (ii) DECODE 
AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND 
NONCOMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED 
TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER 
USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE HTTP://
WWW.MPEGLA.COM

4

  Using open source software

5

  AVC Patent Portfolio License

Summary of Contents for IPLEX NX IV9000N





























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands