Olympus IPLEX G Lite Instructions Manual Download Page 10

Page: 10 / 116

Note that use of this instrument in ways that are not specifically described in this instruction

manual does not ensure the safety and it may also cause the malfunction of this instrument. Be

sure to follow this instruction manual when using this instrument.

The following symbols are used throughout this instruction manual.

: Indicates an imminently hazardous situation which, if not avoided, will

result in death, serious injury or damage of observation object.

: Indicates a potentially hazardous situation which, if not avoided, could

result in death, serious injury or damage of observation object.

: Indicates a potentially hazardous situation which, if not avoided, may

result in minor or moderate injury. It may also be used to alert against
unsafe practices or potential material damage.

: Indicates a potential situation which, if not avoided, may result in

failure of this instrument.

: Indicates additional helpful information.

Safety precautions - General safety precautions -

Comply strictly with the precautions described below when handling this instrument. The

information is supplemented by dangers, warnings and cautions given in each chapter. The

safety cannot be ensured when the instrument is used in ways that are not specifically described.

DANGER

●

Never use the instrument for observing inside of the human or animal cavity.

Otherwise, death or the serious injury of the person or animal may result.

●

Never use the instrument in the following environments.

–

Where flammable atmospheres are present

–

Where metal dust or other dust is present

Otherwise, an explosion or fire may result.

WARNING

●

Do not repair, disassemble or remodel the instrument.

Never repair, disassemble or remodel the instrument. Otherwise, the injury of human bodies

or the damage of the instrument may result. Only personnel who are authorized by Olympus

are allowed to repair the instrument. Olympus is not liable for any accidents or instrument

damage that occurs as a result of repairs attempted by personnel who are not authorized

by Olympus.

●

Stop using the instrument immediately at the first sign of heat, smoke, abnormal odor,

abnormal noise or any other abnormality.

Even if the instrument is still operable, turn OFF the power.

DANGER

WARNING

CAUTION

NOTE

NOTICE or

TIP

Safety precautions

Summary of Contents for IPLEX G Lite





















































































































Search results

Summary of Contents for IPLEX G Lite

Reviews:

Related manuals for IPLEX G Lite

Brands by name

Popular brands

Olympus IPLEX G Lite, Instructions Manual

Search results

Summary of Contents for IPLEX G Lite

Reviews:

Related manuals for IPLEX G Lite

Brands by name

Popular brands