![background image](http://html2.mh-extra.com/html/olympus/e-450/e-450_instruction-manual_3906963067.webp)
67
EN
7
Fl
as
h shooting
When the shutter speed is set to 2 sec.
Slow synchronization (1st curtain)/Red-eye reduction flash
!
SLOW
While using slow synchronization with flash shooting, you can also use this function to
achieve red-eye reduction. When shooting a subject against a night scene, this function
allows you to reduce the red-eye phenomenon. As the time from emitting pre-flashes to
shooting is long in 2nd curtain synchronization, it is difficult to achieve red-eye reduction.
Hence, only 1st curtain synchronization setting is available.
Fill-in flash
#
The flash fires regardless of the light conditions.
This mode is useful for eliminating shadows on
the subject’s face (such as shadows from tree
leaves), in a backlight situation, or for correcting
the color shift produced by artificial lighting
(especially fluorescent light).
x
Notes
• When the flash fires, the shutter speed is set to 1/180 sec. or less. When shooting a subject
against a bright background with the fill-in flash, the background may be overexposed. In this
case, use the optional FL-50R external flash or a similar flash and shoot in the Super FP flash
mode.
g
“Super FP flash” (P. 71)
Flash off
$
The flash does not fire.
Even in this mode, the flash can be used as an AF illuminator when it is raised.
g
“AF ILLUMINAT.” (P. 83)
Manual flash
This allows the built-in flash to output a fixed amount of light. To shoot with manual flash, set
the f-number on the lens based on the distance to the subject.
Ratio of amount of light
GN: Guide number
(Equivalent to ISO 100)
FULL (1/1)
12
1/4
6
1/16
3
1/64
1.5
0
seconds
2
seconds
2nd curtain
1st curtain
2nd curtain flash fires
1st curtain flash fires
Shutter closes
Shutter fully opens
2 seconds
Calculate the f-number on the lens using the following formula.
Aperture (f-number) =
GN × ISO sensitivity
Distance to the subject (m)
s0029_e_00_0_unified.book Page 67 Monday, March 2, 2009 5:26 PM