![background image](http://html2.mh-extra.com/html/olympus/e-450/e-450_instruction-manual_3906963074.webp)
74
EN
P
la
y
back functi
ons
8
8
Playback functions
The basic procedure for viewing pictures are as shown below.
However, before using any of these functions, follow Step 1 below. You can set the camera to
automatically switch to single-frame playback mode after shooting.
g
“REC VIEW” (P. 90)
1
Press the
q
button (Single-frame playback).
• The last recorded image appears.
• The LCD monitor turns off after more than 1 minute if no
operations are performed. The camera will turn off
automatically if there is no operation after 4 hours. Turn on
the camera again.
2
Use
p
to select images you want to view. You can
also turn the dial to switch to
U
for close-up
playback.
Single-frame/Close-up playback
j
INFO
button
p
q
button
L N
N
15
15
15
Press
p
to change the
close-up position.
Press
p
to move the
display of the close-up
position.
When
[
g
FACE DETECT]
(
g
P. 39) is set to
[ON]
,
a frame is displayed
around a detected face.
Press
i
to move the
frame to another face.
Press
bd
to view frame-
by-frame close-ups.
When
[
g
FACE DETECT]
is set to
[ON]
, press
ac
to move to another face in
close-up position.
• Press the
INFO
button
to return to close-up
playback.
(Single-frame playback)
(Close-up playback)
Press the
INFO
button
a
: Displays the frame that is
stored 10 frames back
c
: Displays the frame that is
stored 10 frames ahead
d
: Displays the next frame
b
: Displays the previous frame
(Close-up position playback)
Press the
INFO
button
(Close-up frame-by-frame playback)
• To exit the playback mode, press the
q
button again.
• Pressing the shutter button halfway
resumes the shooting mode.
s0029_e_00_0_unified.book Page 74 Monday, March 2, 2009 5:26 PM