![background image](http://html2.mh-extra.com/html/olympus/e-450/e-450_instruction-manual_3906963030.webp)
30
EN
1
B
asic c
a
m
er
a operation
s
Normally, current camera settings (including any changes you have made) are retained when
the power is turned off. To reset the camera to the factory default settings, set
[RESET]
. You
can register settings in advance to
[RESET1]
and
[RESET2]
. The camera settings at that
time are registered in
[RESET1]
and
[RESET2]
. For details on the registered functions, refer
to “Functions that can be registered in Custom Reset Settings” (
g
P. 121).
Registering [RESET1]/[RESET2]
1
Select either [RESET1]/[RESET2] to register and press
d
.
• If settings have already been registered,
[SET]
is displayed next to
[RESET1]
/
[RESET2]
.
Selecting
[SET]
again overwrites the registered setting.
• To cancel the registration, select
[RESET]
.
2
Select [SET] and press the
i
button.
Using reset settings
You can reset the camera to
[RESET1]
or
[RESET2]
setting or restore the factory default
settings.
[RESET]
: Resets to the factory default settings. For the default settings, see
“Menu directory” (
g
P. 122).
[RESET1]/[RESET2]
: Resets to the registered settings.
1
Select [RESET], [RESET1] , or [RESET2] and press
the
i
button.
2
Use
ac
to select [YES], then press the
i
button.
Resetting to the factory default settings
Menu
MENU
[
W
]
[CUSTOM RESET]
Menu
MENU
[
W
]
[CUSTOM RESET]
RESET1
YES
NO
CANCEL
SELECT
GO
s0029_e_00_0_unified.book Page 30 Monday, March 2, 2009 5:26 PM