![background image](http://html.mh-extra.com/html/olympus/c60-c60-6mp-digital-camera/c60-c60-6mp-digital-camera_reference-manual_733943151.webp)
The picture is too dark.
150
10
Miscellaneous
The picture is too bright
Troubleshooting
Possible cause
Corrective action
Ref. Page
Increase the aperture value. Or
set the camera to the
P
mode.
Increase the shutter speed or
set the camera to the
P
mode.
Hold the camera correctly,
keeping your fingers away from
the flash.
Shoot within the flash working
range.
Select a flash mode other than
flash off .
Set the flash to fill-in mode , or
use the spot metering mode .
Higher shutter speeds are used
when the sequential shooting
mode is selected, which may
result in pictures that are darker
than usual. Set DRIVE to
in
the MODE MENU.
If the center of the subject is too
bright, the image as a whole
emerges darker. Adjust the
exposure compensation toward
plus (+).
Decrease the aperture value or
set the camera to the
P
mode.
Decrease the shutter speed or
set the camera to the
P
mode.
P. 58
P. 59
P. 39
P. 55
P. 55
P. 55, 62
P. 68
P. 84
P. 58
P. 59
The aperture value is small
in the
A
(
M
) mode.
The shutter speed setting
is too slow in the
S
(
M
)
mode.
The flash was blocked by
your finger.
The subject was out of the
working range of the flash.
The flash was set to the
flash off mode .
The subject was too small
and was backlit.
The sequential shooting
mode was used.
The center of the subject is
too bright.
The aperture value setting
is too high in the
A
(
M
)
mode.
The shutter speed setting
is too fast in the
S
(
M
)
mode.