Olympus C60 - C60 6MP Digital Camera Reference Manual Download Page 153

Page: 153 / 205

No picture is displayed on the TV when connected to the camera.

The monitor is hard to see.

Single-frame erase and all-frame erase cannot be performed.

152

Miscellaneous

Pictures you have taken do not appear on the monitor.

Troubleshooting

The power is off.

The camera is in the
shooting mode.

There are no pictures on
the card.

There is a problem with
the card.

The camera is connected
to a TV.

The pictures are protected.

The video output signal is
incorrect.

The TV video signal
setting is incorrect.

The brightness is not
adjusted properly.

The monitor is exposed to
direct sunlight.

Press the

(playback) button.

Close the lens barrier and press
the (playback)

button.

NO PICTURE appears on the
monitor. Record pictures.

Refer to “Error codes”.

The monitor does not function
when the AV cable is connected
to the camera.

Display pictures with and
press the (protect) button to
cancel protection.

Set the video output signal
according to the region where
used.

Set the TV to the video input
mode.

Select in the MODE MENU
and adjust the brightness.

Block the sunlight with your
hand.

P. 21, 89

P. 89

—

P. 143

P. 97

P. 100

P. 122

P. 97

P. 117

—

Possible cause

Corrective action

Ref. Page

Summary of Contents for C60 - C60 6MP Digital Camera














































































































































































































Search results

Summary of Contents for C60 - C60 6MP Digital Camera

Reviews:

Related manuals for C60 - C60 6MP Digital Camera

Brands by name

Popular brands

Olympus C60 - C60 6MP Digital Camera, Reference Manual

Search results

Summary of Contents for C60 - C60 6MP Digital Camera

Reviews:

Related manuals for C60 - C60 6MP Digital Camera

Brands by name

Popular brands