![background image](http://html2.mh-extra.com/html/olympia/oc-1280-p/oc-1280-p_operating-manual_3896424014.webp)
Installing the Camera
14
D
1. Connecting the Power Adapter
This section explains how to connect the camera to the
power supply and then decide whether the camera is to
be integrated in an existing alarm system.
Use With an Alarm System
If you want to integrate the camera in an alarm system
(Protect Series 6xxx / 9xxx alarm system from Olympia),
you must use the receiver supplied. If you do not want to
integrate the camera in an alarm system, skip this section
and continue with
Use Without an Alarm System
.
The receiver is connected directly to the camera and pow
er adapter of the camera. In this case, power is supplied
to the camera from the receiver.
1. Connect the plug (17) on the receiver to the port
(12) on the connection cable of the camera to enable
data exchange with the alarm system.
2. Connect the plug (15) on the receiver to the port
(13) on the connection cable of the camera to provide
the power supply.
3. Connect the power adapter supplied to the port
(16) on the receiver and a power socket.
The LEDs on the network connection port (10) signal
when power is being supplied and a connection exists
to the network (lights up orange) and data is being
transmitted (flashes green).
Registering the Receiver on the Alarm
System
The following section describes how to register the receiv
er on the alarm system.
1. Disconnect the power adapter from the power socket.
2. Select the
Register
menu on the alarm system
according to the relevant operating manual.
3. Connect the power adapter to the power socket.
4. When the message
Siren
followed by a number ap
pears in the alarm system display, registration on the
alarm system has been completed successfully.
5. The receiver is now registered on the alarm system.
6. You can alter the
Siren
entry to
Camera
or
Video
, for
example, according to the relevant operating manual.