Operating the Camera (iOS)
54
D
Receiver (Protect)
If you want to integrate the camera in an alarm system
(Protect Series 6xxx / 9xxx alarm system from Olympia),
you must use the receiver supplied.
When you want to activate the receiver, make sure the
receiver is connected to the camera and has been regis
tered on the alarm system (see Section
Installing the
Camera
).
1. Touch the
Switch icon
beside the
Receiver (Protect)
option. The
Switch icon
indicates it is
ON
.
When this function is activated, the camera receives a
signal from the alarm system in the event of an alarm.
Your camera starts to make a video recording of the area
under surveillance and, at the same time, sends a push
notification to your smartphone or tablet PC.
TEST WLAN
