Installing the Camera
22
D
9. Assembling the Cable Box
After assembling the camera, you can stow the connec
tion cable (1) and, if necessary, the receiver in the cable
box to protect excess lengths of cable from any unwanted
manipulation, vandalism or other unauthorised access.
Observe the following points when selecting the assembly
location.
The cable box must be in the direct vicinity of the
camera.
The power cable can be laid easily into the box.
(Option) The receiver must be within range of your
alarm system.
20
1
19
WARNING!
Risk of fatal injury through electric shock or gas
explosion!
During installation, pay attention to the possibility of
electrical cables and gas pipes running in the walls.
Pay attention that you do not damage electric cables
or gas pipes.
1. Use the holes in the cable box as a drilling template
and drill four suitable holes in the wall or ceiling.
2. Loosen the screws in the lid (19) of the cable box us
ing an appropriate screwdriver and remove the cable
box lid (19).
3. Drill another suitable hole in the wall or ceiling close to
the cable box through which to feed the power ca
ble (20) from indoors out to the cable box.
4. Insert the respective dowels in the drill holes for the
cable box.
5. Pay attention that the
cable glands face downwards
and assemble the cable box using appropriate screws.