Connecting the Camera
Connecting the Camera -
13
G
1. Drill two sufficiently large holes in the wall.
Use the mounting bracket supplied as the template
for the position of the holes.
2. Insert the dowels in the drill holes.
3. Assemble the mounting bracket using suitable screws.
4. Fit the camera on the mounting bracket.
Use the internal thread on the underside of the cam
era.
Connecting the Camera -
Network Cable
Connect the network cable to the network connection
port (10) on the camera and a free network connection
port (LAN) on the router.
A condition for putting into operation is the unam
biguous identification of your camera within your net
work. If you have not altered the default setting of
your router, this will occur automatically. In the case
of most routers, the
DHCP
function is activated at
the factory.
More detailed information on the
DHCP
function is
provided in the operating manual supplied with your
router.
Connecting the Camera -
Power Adapter and Receiver
If you want to integrate the camera in an existing alarm
system, you need the receiver supplied.
If you only want to use the camera to monitor a certain
area, you do not need the receiver supplied.
Operating with an Alarm System
(Protect 6xxx / 9xxx)
If you want to integrate the camera in an alarm system
(Protect Series 6xxx / 9xxx alarm system from Olympia),
you must use the receiver supplied.
1. Connect the receiver to the port (8) on the camera.
ATTENTION!
Property damage is possible!
The camera could be damaged if you use a wrong
power adapter.
Only use the power adapter supplied.
2. Connect the power cable (16) on the receiver to the
power connection port (7) on the camera.
