Cash Register CM 940-F / 941-F / 942-F
Olympia 2011
Page 81
Specifications subject to change without notice!
6.17
Programming foreign currencies
A maximum of 2 foreign currencies can be programmed.
Note:
If you want to operate with the second foreign currency, you must programme the
┣
FC 2
┫
key on the
keyboard(see Chapter 6.28). The
┣
FC
┫
key set-up on the keyboard at the factory only applies to foreign
currency 1!
Clarify the following before starting with the actual programming operation:
●
Which foreign currency should be programmed?
●
In which storage location should this foreign currency be programmed?
●
What text is associated with the foreign currency (e.g. the currency abbreviation in accordance with ISO 4217)?
●
What is the exchange rate (foreign currency to local currency)?
Example:
US Dollar should be programmed as the foreign currency in memory location 2. The exchange rate at the
time of programming was 1 EUR = 1.35 USD (native (local) currency = 1 EUR, foreign currency = 1.35
USD).
Input Display
FC 1-
1=
1. Set the key to PRG.
2. Select
programme number 16
(see Chapter 6.1.2).
3. Press
the
┣
CASH
┫
key to confirm
the selection.
The first foreign currency memory
location appears in the display.
#
[FC01 ]
Native: 0,01
Foreign:
0,01
FC 2-
1=
4. Use
the
┣
CASH
┫
key to switch to
the foreign currency memory
location.
#
[FC01 ]
Native: 0,01
Foreign:
0,01
5. Use
the
┣↑┫
and
┣↓┫
keys to
switch to the text input area
[
FC-0x
].
[FC02 ]
6. Press
the
┣
CASH
┫
key to confirm
the input.
#
FC02
7. Delete the existing text.
8. Enter the new foreign currency
text
(see Chapter 6.2).
2x
then
#
U
4x
then
#
US
1x
then
#
USD
9. Conclude text input by pressing
the
┣
CASH
┫
key.
#
[USD ]
10. Use the
┣↑┫
and
┣↓┫
keys to
move to the
Foreign
input area.
Foreign: 0.01
11. Enter the foreign currency.
Foreign: 1.35
12. Press the
┣
CASH
┫
key to confirm
the input.
#
Save...!!
Please Continue...
- Continued on next page -
