background image

 

Cash Register CM 940-F / 941-F / 942-F

 

 

Olympia   2011 

Page 39 

Specifications subject to change without notice! 

6.4 Programming 

departments 

A maximum of 99 departments can be programmed. 

Note:

 

On leaving the factory, departments 1 to 8 are already assigned VAT tax rate 1 at 19% and departments 9 to 
24 are assigned VAT tax rate 2 at 7%. All the departments are set-up as an itemised department with free 
pricing. If these settings correspond with those you need, no adjustments to the programme are necessary at 
this point. 

6.4.1 Programmable 

contents 

The following 

4 features

 must or can be programmed or defined for each department: 

 

6.4.1.1 Department 

name 

Programme an individual department name. This programming step is optional. On leaving the factory, general, standard 
names are pre-programmed. 
 

6.4.1.2 Department 

fixed 

prices 

A maximum of two department fixed prices can be programmed. Department fixed price 1 is usually the standard price, 
department fixed price 2 relates to a reduced price, e.g. within the scope of a "happy hour" or products which are no 
longer fresh. 
The entry of department fixed prices is optional. If you do not enter fixed prices (fixed price is 0.00), the cash register only 
operates using free pricing. 
When programming, always enter the fixed price with the set number of decimal places and decimal point. 
 

6.4.1.3 

Tax rate assignment 

Assign a tax rate to each department. 
 

6.4.1.4 Department 

status 

 

The department status defines whether it concerns a positive or negative department and an itemised or single item 
department. 
 

Department type 

DP status number 

Positive itemised department 

00 

Positive single item department  

01 

Negative itemised department (e.g. for deposit refunds) 

02 

Negative single item department 

03 

 

Summary of Contents for CM 941-F





























































































































































Reviews: