20
CO A
LARM
CI 200
Mute mode
1
Press the button (4) to mute an acoustic alarm. Mute mode remains active for 5
minutes.
The alarm signal LED (1) flashes four times followed by a 5 second pause. Other CO
alarms linked in the network are also muted after Mute mode has been activated.
Warning!
Carbon monoxide is a highly flammable, invisi
-
ble, odourless gas. Take every alarm seriously. Follow the
instructions provided in Section
In the Event of an Alarm
on Page 14
.
Low Battery Charge Warning
The CO alarm automatically detects and signals a low battery charge.
In this case, the CO alarm issues two short acoustic signals every 30 seconds. The fault
signal LED (2) flashes accordingly. The CO alarm continues to operate without any limita
-
tions during this period.
1
Change the batteries in the CO alarm within 30 days, install new ones of the same
type.
Further information is available in Section
Changing the Battery on Page 17
.