![background image](http://html1.mh-extra.com/html/olympia/ci-200/ci-200_operating-manual_3901130018.webp)
18
CO A
LARM
CI 200
Installation Steps
When assembling the CO alarm, pay attention to maintaining at least 100 cm distance to
doors, windows or ventilation ducts.
Warning
! Risk of serious injuries through damaging cables
or pipes! During installation, pay attention to the possibili
-
ty of cables and pipes running in the walls and ceilings. We
are not deemed liable for installation errors. In case of
doubt, contact a specialist!
1
Ensure that there are no electric cables, gas or water pipes near the installation
location.
2
Drill two holes, about 30 mm apart, at the intended installation location.
3
If necessary, insert dowels in the drill holes and insert the screws enclosed in the
product package in the holes so that the CO alarm can be mounted by hooking the
screw heads in the fittings on the rear side.
4
Install the CO alarm by mounting the fittings on the rear side on the screw heads.
5
Disassembly of the CO alarm is performed in the reverse sequence.