Date
27/06/2019
Document number
921100400_09_002
Page
6 of 67
6 / 67
1.3
Indicators and Controls
The control panel’s LCD screen displays information regarding the current state of the fire detection
system. The front face is also equipped with LED indicators for essential indications (alarm, fault, status,
zones, etc).
On the right side of the front face there is an 11-key keyboard for controlling and configuring the fire
detection control panel.
The following picture describes in general:
1.3.1
Control panel
’s front
Figure1-1. Control panel
’s front
The control
panel’s front is
equipped with LED indicators
and an LCD screen that
provide essential information
regarding the fire detection
system
state.
The
LED
indicators
provide
general information (e.g. if there
is any alarm, the General Alarm
LEDs are lit), while more detailed
information is displayed on the
screen (e.g. ALARM 1, ROOM
214).
Next to the screen there are 11
control keys to operate the
panel.
These keys correspond to basic
panel operations, such as left,
right, up, down, enter (select),
esc (exit or a level back), or
back. There are also 5 special
keys
with
specific
functions
(Reset, Siren Silence/Resound,
Evacuate, View alarms, View
faults)
Generally, by pressing a key, an
action takes place (e.g. Reset),
or a menu with grouped functions
is displayed (see section 1.3.2).
The
control panel’s front door
is secured with a key lock for
accessing the interior.
Zone in Alarm
indicators
Control unit
fault indicators
Status indicators
LCD screen
Control
keyboard
