Date
27/06/2019
Document number
921100400_09_002
Page
58 of 67
58 / 67
5.8
Technician’s Menu on Ethernet
The control panel
’s programming can be made with the keypad in front of the panel. Alternatively, many
options are available via PC (web browser)
. The factory’s default IP address is
10.0.1.105.
When “TECHNICIAN MENU” link is clicked, the control panel asks for technician code.
Write the code in the text box and click send. If the code is correct the technician menu appears.
The menu design is similar to the corresponding panel’s menu. Although some functions can be made
exclusively by using the Ethernet menu, (e.g.
“CHANGE INFORMATION”).
The following paragraph is describing the new options available to configure via web interface that were
not present via the keypad.
