D. Roof Section
Exploded view of all parts necessary to
complete Roof Section. Polygal panels shown
later. Identify all parts prior to starting.
Metal Ridge Caps(3)
Foam Enclosures
(several pcs)
Metal Roof Panel
Short 41” (4)
Roof Batten 48 1/4” (12)
Roof Batten 45 1/2”(6)
55.
Starting on the polygal side locate an
Outside Roof Batten (48 1/4” Long)
and place on roof
rafters. Place at top of Rafter section where Rafter and Ridge Boards meet. Batten should be posi-
tioned evenly on 3rd rafter. Batten will overhang outside Rafter by 2 3/4”.
Polygal Side
Batten Spacer
Long 13 3/4” (4)
Batten Spacer
Short 13 1/2” (4)
Metal Roof Panel
Long 43” (4)
Polygal Panels (6)
Overhangs outside
Rafter by 2 3/4”
Centered on 4th
Rafter.
56.
Attach
Batten
to Rafters with
3 - 1 1/4” screws
per Rafter section.
Important:
pre-drill pilot
holes with 1/8” drill bit first to prevent splitting. Place
Middle Roof Batten (45 1/2” Long)
next to
the first as per
Step 55
and attach with
3 - 1 1/4” screws
. Place
Outside Roof Batten (48 1/4”
Long)
next to this middle batten as per
Step 55
and attach with
3 - 1 1/4” screws.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 25