![background image](http://html.mh-extra.com/html/olt/ssgs812/ssgs812_assembly-manual_732286035.webp)
80.
Attach remaining
Narrow Wall Trims
where wall panels come together and leave a seam.
Note:
the Narrow Trim is 79” long on the Short Wall Side, 88” long on the Tall Wall Side, and 87” on
the Rear Wall. Align Side Trims tight underneath Soffit and Rafter. Attach with 8 - 1 1/2” finishing nails
per piece. Align and attach Rear Trim as per Door Trims in
Step 79.
87” Rear Wall
Narrow Trim
83.
Place the Top Dutch Door Panel into place
and gap top and bottom trims on the outside
about 1/8” apart. On the inside, horizontal door
frames should be about 1/4” apart. Use a shim
once again to help you. Attach hinges to trim
with 2” black headed screws provided.
Slight gap.Top Trim over-
laps bottom trim to prevent
water from getting in.
Bottom Skirting
81.
Attach Door Hinges to
Top
and
Bottom Dutch Door
sections. Top Door has trim overhanging
door at bottom while bottom door has trim recessed slightly. Hinges should be centered on door trim
with barrel nudged to end of trim. Use 2” & 3/4” black headed screws as shown above.
82.
Place Bottom Dutch Door panel into position.
Gap 3/8” on bottom, evenly space on sides, and
attach hinge to doorway seam trim with 2” black
headed screws. Use shim to help keep the door
evenly spaced on bottom. One of the extra roof
shingles (see parts list) can be used.
Bottom Door
3/8” gap at bottom.
Evenly spaced on
sides.
Doorway Seam
T
rim
2” Black
Screws
Top and Bottom
Hinges centered
on door trim.
Top Door Trim
Bottom Door Trim
Middle Hinges
centered on trims.
2“ Screws
Top Door
Bottom Door
1/4” gap on
inside.
3/4” screw
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 35