60.
Position first row of
Outside Roof Battens (3/4” x 3 1/2” x 48 1/4”)
and
Middle Roof
Battens (3/4” x 3 1/2” x 45 1/2”)
on short roof side and attach as per
Steps 55-56
. Attach
Batten
Spacer Short (3/4” x 1 1/2” x 13 1/2”)
below first row of Battens. Continue attaching Spacers and
Battens as per
Steps 57 - 59
until you complete all 3 rows.
13 1/2” Batten Spacer
Important:
Do not fasten down Roof Panels with
Hangars still in place. Metal Roof Hangars will temporari-
ly help keep Metal Roof Panels in place before they are
fastened.
61.
Starting on the short roof side, locate
4 Long Metal Roof Panels (39” wide x 43”long)
and
4 Metal Roof hangars
. To temporarily hold the Metal Roof Panels in place, hook a Metal Roof
Hangar onto the lowest Batten approximately where the center of the first panel will be. Place the
first Metal Roof Panel on Battens and into Hangar. Do not fasten Panels down until
Step 66
. Place
remaining 3 Panels and Hangars on the same way. Metal Roof Panels overlap eachother.
Short Roof Side
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 27