![background image](http://html.mh-extra.com/html/olt/ssgs812/ssgs812_assembly-manual_732286037.webp)
89.
Attach
Facia Nailing Strips
(3/4” x 1 1/2” x 34”) to the underside of
Battens
using 3- 1 1/4”
screws per piece. Do all outside roof panels. Starting with the
Short
Roof side, attach
Front and
Rear Facia
(3/4” x 3 1/2” x 38 1/4” angle cut on ends) to ends of battens with 5 - 1 1/2” finishing
nails per side. Facia end lines up with rafter ends. Do a dry run with side facia in Step 87 before
attaching.
90.
Attach
Side Facia
(3/4” x 3 1/2” x 72”) to roof rafter ends. There are 2 pieces per side. Secure
with 8 - 1 1/2” finishing nails per piece. Side Facia will sandwich Front and Rear Facia. Do a dry run
with Front, Rear and Side Facia to confirm correct positioning prior to attaching.
88.
Align and attach remaining Ridge Caps (3 1/2” wide) over Double Rafters as per
Steps 86 & 87
.
Edge of batten
Edge of batten
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 37