![background image](http://html.mh-extra.com/html/olt/ssgs812/ssgs812_assembly-manual_732286017.webp)
31.
Screw vertical framing of corner extendors together wtih 2 - 2 1/2” screws. Locate and position
an
Angle Extendor Wall
on the rear wall of Sunshed. Align once again so 2x3 frame lines up with
previously installed Wall Extendor and regular wall panel. When correctly in place, secure with
3 - 2 1/2” screws into Window Wall framing, and 2 - 2 1/2” screws into adjacent extendor.
32.
Align and attach remaining Wall Extendors as per
Step 30-31.
Note:
Wall Extendors are not
required for the Short Side walls.
33.
Locate
Rear Top Plate
(3/4” x 2 1/2” x 73 3/4”) and position on wall framing flush on inside. Align
so angle cut on 33 3/4 degree end is facing the high wall and 22 1/2 degree end is facing the short
wall.
Rear T
op
Plate
Tip of 33 3/4 degree Top
Plate flush with wall framing
Flush to inside
of wall framing
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 17