![background image](http://html.mh-extra.com/html/olt/9x6-cabana-bevel/9x6-cabana-bevel_assembly-manual_732293026.webp)
62.
Place the Top Dutch Door Panel into place and gap top and bottom trims on the outside about
1/8” apart. On the inside, horizontal door frames should be about 1/4” apart. Use a shim once again
to help you. Attach hinges to trim with 2” black headed screws provided.
Slight gap.Top Trim over-
laps bottom trim to prevent
water from getting in.
1/4” gap on
inside.
Bottom Skirting
61.
Place Bottom Dutch Door panel into position.
Gap 3/8” on bottom, evenly space on sides, and
attach hinge to doorway seam trim with 2” black
headed screws. Use shim to help keep the door
evenly spaced on bottom. One of the extra roof
shingles (see parts list) can be used.
Bottom Door
3/8” gap at bottom.
Evenly spaced on
sides.
Doorway
Seam
T
rim
2” Black
Screws
60.
Attach Door Hinges to
Top
and
Bottom Dutch Door
sections.
Top Door has trim overhanging door at bottom while bottom door
has trim recessed slightly. Hinges should be centered on door trim
with barrel nudged to end of trim. Use 2” & 3/4” black headed
screws as shown above.
Top and Bottom
Hinges centered
on door trim.
Top Door Trim
Bottom Door Trim
Middle Hinges
centered on trims.
2“ Screws
Top Door
Bottom
Door
3/4” screw
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 26