Outdoor Living Today www.outdoorlivingtoday.com [email protected]
Page 26
D3.
For correct Roof Panel position, align panel so sheathing sits evenly on Center Rafters.
Complete both roof Panels.
Roof Panel
centered on
rafter.
Front - Shingle overhang
Inside - Shingles flush
Outside Side
D1.
Carefully flip Roof Panels over so plywood sheathing is facing up.
Center Rafter/Facia Nailing Plates
(2) (3/4” x 3/4” x 51”) onto outside of each
panel flush with plywood. Attach with
4 - 1 1/4” Screws
evenly spaced. The
Rafter/Facia Nailing Plate provides for a greater nailing surface later when you
attach side facia.
Rafter/Facia Nailing Plate.
Outside - Shingle overhang
D2.
Correctly orientate Left Side Roof Panel, with shingles overhanging plywood on the side of the
shed and flush with plywood to the middle. Place on rafters with front of plywood just about flush with
rafter ends but just slightly recessed. Doing so allows front facia to sit better.
Shingles overhang
plywood on outside.
Front of plywood
1/8” recessed
with rafter end.
Plywood flush
with shingles
on inside.