background image

8x8 Gardener’s Shed -  

Metal Roof - Finger Jointed Siding 

- Assembly Manual

Version 1.3 

July 22, 2021

In the event of a missing or broken piece, simply call the Outdoor Living Today Customer 
Support Line @ 1-888-658-1658 within 30 days of the delivery of your purchase. It is our  
commitment to you to courier replacement parts, free of charge, within 10 business days of 
this notification. Replacement parts will not be provided free of charge after the 30 day grace 
period. 

Some of the safety and usage measures you may wish to consider include: 
 
-snow load ratings vary by geographical location. If heavy or wet snowfall occurs, it is advisable to sweep the 
snow off the roof(s).  
-if the product is elevated, any structural and building code requirements are solely the customer's  
responsibility, and should be abided by.  
-in high or gusty wind conditions it is advisable to keep the structure securely grounded.  
-have a regular maintenance plan to ensure screws, doors, windows and parts are tight.  

 
Customer agrees to hold Outdoor Living Today Partnership and any Authorized Dealers free 
of any liability for improper installation, maintenance and repair.

Toll Free 1-888-658-1658           www.outdoorlivingtoday.com    [email protected]

Page 1

Thank you for purchasing 
an 8x8 Gardener’s Shed.  
Please take the time to 
identify all the parts prior 
to assembly.

Safety Points and Other Considerations 
Our products are built for use based on  
proper installation and normal residential use,  
on level ground. Please follow the instruction 
manual when building your shed and retain 
the manual for future maintenance purposes.

STOCK CODE # 

GAR88-FJ-METAL

Summary of Contents for Gardener's Shed GAR88-FJ-METAL









































Reviews: