Outdoor Living Today www.outdoorlivingtoday.com [email protected]
Page 50
E40.
Attach
Door Handles.
Handles are positioned on top section of each door and mounted with
3/4” Black Screws.
E41.
Attach Black Drop Latch as illustrated above with
3/4” Black Screws.
Note how female part
of Drop Latch is positioned higher than male. Do a dry run first to position Drop Latch correctly.
Important
- Drill pilot holes with 1/8” drill bit prior to securing with screws to prevent wood splitting. On
3/4” screw, drill shallow pilot hole only.
E30.
Once the Cane Bolt is attached, close doors and mark a hole in the stop to accommodate
the bolt. You can bang the top of the bolt using a hammer and a block of wood to prevent damage.
Once complete, open doors and drill hole where previously marked with 1/2” bit.
Drill 1/2” Diameter Hole
to accommodate rod of
Cane Bolt.
3/4” Black
Screws.
3/4” Black Screws.
3/4” Black Screw
