OLT 84-D-BASE-BEV, Assembly Manual

Page: 4 / 51

Outdoor Living Today www.outdoorlivingtoday.com sales@outdoorlivingtoday.com
Page 4
Thank you for purchasing our 8x4 SpaceSaver with Double Door.
Please take the time to identify all the parts prior to assembly.
Note: Trim and Skirting pieces are graded with the best face being rough sawn.
Rough sawn cedar is much easier to paint and stain.
Parts List
A. Floor Section
Floors
1 - 45 ½” x 75” - Large Floor Frame (2 Joists unattached)
1 - 45 ½” x 21” - Small Floor Frame (2 Joists ATTACHED)
2 - 1 ½” x 3 ½” x 72” - Floor Joists
5 - 1 ½” x 3 ½” x 45 ½” - Floor Runners
1 - 5/8” x 45 ½” x 75” - Plywood Flooring
1 - 5/8” x 45 ½” x 21” - Plywood Flooring
Steps
A1 - A8
B. Wall Section
Main Wall Panels
4 - 1 ½” x 2 ½” x 45 ½” - Wall Plates
4 - 45 ½” x 75” - Solid Wall Panels
2 - 12” x 73” - Narrow Wall Panels
Header/Wall Extenders
2 - 2” x 3 ½” x 6 ½” - Door Header - (Dado top edge)
1 - 2” x 3 ½” x 78” - Door Header - Long
Dado cut on edge- Aluminum Support Strip Attached
2 - 1½ ” x 3 ½” x 73” -
Door Jambs - Vertical
2 - Top Triangular Siding Pc for Angle Wall Extenders
(L/R)
2 - 45 ¼” - Angle Wall Extenders (L/R)
2 - 9” x 45 ½” - Wall Extenders
1 - ¾” x 3 ½” x 70” - Horizontal Wall Cleat
1 - ¾” x 3 ½” x 21” - Horizontal Wall Cleat
B1 - B10
B11 - B22
C. Rafters
6 - 1 ½” x 2 ½” x 54” - Rafters
2 - ½” x 3 ½” x 48” - Front Soffits
2 - ½” x 3 ½” x 48” - Rear Soffits
2 - ¾” x ¾” x 51” - Rafter/Facia Nailing Strips -
C1 - C6
D. Roof Section - CEDAR
2 -
Roof Panels - 51” w x 56” d (1 - Left 1- Right)
4 - 5 ½” Wide x 16” to 18” long - Filler Shingles
2 - ½” x 4 ½” x 51 5/8” - Roof Ridge Boards
D1 - D11
D. Roof Section - METAL
6 - ¾” x 3 ½” x 50” - Roof Battens
4 - ¾” x 1 ½” x 21 1/2” - Batten Spacers
2 - ¾” x ¾” x 51” - Rafter/Facia Nailing Cleats
3 - 39” wide x 58 ½” long - Metal Roof Panels
Several Pcs - Foam Enclosures for Metal Roof
Steps
D1 - D13
D. Roof Section - PLYWOOD
1 - ⅝” x 4” x 53 ¾” - Center Plywood for Roof
2 - ⅝” x 48” x 21 ¾” - Small Plywood for Roof
2 - ⅝” x 48” x 32” - Large Plywood for Roof
D1 - D7
E. Misc. Section
Skirting, Trim, Door, Facia & Misc. Parts
6 - ½” x 4 ½” x 45 ¼” - Bottom Skirting
8 - 7/8” x 2 ½” x 36” - Corner Filler Trims
2 - 7/8” x 2 ½” x 10” - Rear Center Corner Filler Trims
2 - ½” x 5 ½” x 79” - Front Corner Trims
2 - ½” x 5 ½” x 88 ¾” - Rear Corner Trims
2 - ½” x 2 ½” x 80” - Side Front Corner Trims
2 - ½” x 2 ½” x 88 ¾” - Side Rear Corner Trims
1 - ½” x 2 ½” x 88 ¾” - Rear Middle Trim
2 - ½” x 3 ½” x 79” - Vertical Door Trims
1 - ½” x 1 ¼” x 64” - Horizontal Door Trim
2 - ½” x 2 ½” x 8 ½” - Horizontal Narrow Wall Trims
1 - 31 ½” x 72” - Full Door
2 - ½” x 4” x 54 1/8” - Side Facia (Angle Cut Ends) -
reverse
4 - ½” x 4” x 50 ½” -
Front and Rear Facia
2 - Detail Facia Plates (4” high)
1 - ½” x ½” x 32” - Upper Horizontal Door Stop
4 - ½” x ½” x 36 ¼” - Vertical Door Stops
2 - ½” x ½” x 28 7/8” - Upper Interior Door Trims
4 - ½” x ½” x 35 7/8” - Side Interior Door Trims
1 - 1 ½” x 2 ½” x 6” - Upper Door Stop
1 - ¾” x 2 ½” x 64” - Lower Door Stop /Floor Threshold
1 - x 2 ½” x 70” - Interior Vertical Door Flange
1 - 45 ¼” - Extra Piece of Bevel Wall Siding - Use if wall
panel siding is damaged or to shim floor or door.
For GardenSaver
1 - ½” x 2 ½” x 88 ¼” - Horizontal Door Trim
1 - ½” x 2 ½” x 8 5 ⁄
8
” - Front Middle Trim
E1 - E41