Olivetti Olibook M1025, User Manual

Page: 47 / 104

BIOS Utilities
The Setup Utility 5 - 3
5
Non-Fatal Errors
This kind of error still allows you to boot. You will get a message identifying the
problem (make a note of this message!) followed by the prompt:
• Press <F1> to resume
• <F2> to enter Setup
Press
F1 to see if the boot process can continue. It may work, without the correct
configuration.
Press
F2 to run the Setup program and try to correct the problem. If you still get
an error message after you change the setting, or if the “cure” seems even worse,
call for help.
The Setup Utility
The Phoenix TrustedCore Setup Utility tells the system how to configure itself
and manage basic features and subsystems (e.g. port configuration).
Entering Setup
To enter Setup , turn on the computer and press F2 during the POST . The prompt
( Press F2 to Enter Setup ) seen on page 5 - 2 is usually present for a few seconds
after you turn on the system. If you get a “Keyboard Error”, (usually because you
pressed
F2 too quickly) just press F2 again.
If the computer is already on, reboot using the Ctrl + Alt + Delete combination
and then hold down F2 when prompted. The Setup main menu will appear.
Setup Menus
The Setup menus shown
in this section are for ref-
erence only. Your com-
puter’s menus will
indicate the configura-
tion appropriate for your
model and options.