20
Call the fax machine with the desired frequency so that the
fax machine detects it. The display shows:
RING DETECTED
To return the fax machine to the initial stand-by mode.
notE
If the fax machine cannot detect that particular frequency, the
display will show the message "RING NOT DETECT.". At
this point, press the
key and repeat the procedure.
T
O
CHANGE
THE
LENGTH
OF
THE
ACOUSTIC
SIGNAL
This function is only enabled in some countries.
When the fax machine is set up for
automatic reception
with recognition of the type of call
, it behaves as fol-
lows:
•
if it is being called by a
fax machine
, it will automatically
prepare to receive a document after the preset number of
rings
•
if it is being called by a
telephone
, it will emit an
acoustic
signal
for a time of 20 seconds, after which, if you still have
not lifted the handset, it will automatically prepare to receive
a document.
If you want, you can change the length of the acoustic signal
as follows:
Until the display shows:
INSTALLATION
The display shows:
TEL. LINE SETU-UP
Until the display shows:
FAX/TEL TIMER:20
/
Press
|
/
}
to view the other available values: "15", "30" or
"40". For exemple: "40".
To confirm your choice.
To return the fax machine to the initial stand-by mode.
T
O
CHANGE
THE
SILENCE
LAPSE
This function is only enabled in some countries.
To change the silence lapse set on your fax machine, pro-
ceed as follows:
Until the display shows:
INSTALLATION
The display shows:
TEL. LINE SET-UP
Until the display shows:
SILENCE LAPSE.: 6
/
Press
|
/
}
to view the other available values: "3", "4", "8",
"10" or "OFF". For exemple: "4".
To confirm your choice.
To return the fax machine to the initial stand-by mode.
T
O
CHANGE
THE
REMOTE
CONTROL
CODE
If the fax machine is connected to an
emergency telephone
that operates in
tone dialling mode
and is set up for
manual reception
or
automatic reception
with recog-
nition of the type of call, whenever there is a call from a
correspondent wishing to send you a document, you can
set it to receive
the document by typing the code
* *
on
the emergency telephone. This operation has the same
effect as pressing the
key on the fax machine.
You can replace the second "asterisk" of this code using
digits from 0 to 9.
Until the display shows:
INSTALLATION
The display shows:
TEL. LINE SET-UP
The display shows:
PUBL.LINE (PSTN)
Until the display shows:
REMOTE START:ON
The display shows:
TYPE CODE
CODE (0/9,*) **
/
Type the new code, for example: "*8".
To confirm your choice.
To return the fax machine to the initial stand-by mode.
note
If you are connected to a private line, follow the same proce-
dure until the display shows "PUBL.LINE (PSTN)", then press
the
|
/
}
keys to display: "PRIV.LINE (PBX)" and then con-
tinue as indicated in the procedure.
