Olivetti Fax-Lab S95, Instructions Manual

Page: 11 / 56

VII
H
OW TO GET STARTED QUICKLY
T
O SET THE DATE AND TIME
The first time you connect the fax machine to the power
supply or whenever there is a power failure you must set
the date and time as described below.
Once set, the date and time can be changed at any time,
see the "
To change the date and time " section.
1. Press the key:
The display shows:
DATE AND TIME
2. Press the key:
The display shows:
FORMAT: DD/MM/YY
3. If you want to select a different format from the one dis-
played, press the keys:
|
/
}
4. Press the key:
The display shows:
FORMAT: 24 H
5. To select the other time format (12 hours), press the keys:
|
/
}
The display shows:
FORMAT: 12 H
6. Press the key:
The display shows:
DD/MM/YY HH:MM
25-03-04 11:23
7. To enter the new date and time (e.g. 26-03-04; 12:00),
press the keys:
- As each digit is entered, the cursor will move to the next
one.
DD/MM/YY HH:MM
26-03-04 12:00
8. If you wish to move the cursor to digits to be modified, press
the keys:
|
/
}
9. Then overwrite the digits with the correct ones, by pressing
the keys:
-
3. To confirm the setting, press the key:
The display shows a country of destination, for example:
ITALIA
4. To select the desired country, press the keys:
|
/
}
The display shows, for example:
U.K.
If your country is not present among those shown on the
display, see the table below:
COUNTRY COUNTRY TO BE SELECTED
Argentina AMERICA LATINA
Australia NZL/AUSTRALIA
Austria ÖSTERREICH
Belgium BELGIUM
Brazil BRASIL
Chile AMERICA LATINA
China CHINA
Colombia AMERICA LATINA
Czech Republic CZECH
Denmark DANMARK
Finland FINLAND
France FRANCE
Germany DEUTSCHLAND
Greece GREECE
Holland HOLLAND
Ireland U.K./IRELAND
Israel ISRAEL
Italy ITALIA
Luxembourg BELGIUM
Mexico AMERICA LATINA
New Zealand NZL/AUSTRALIA
Norway NORGE
Peru AMERICA LATINA
Portugal PORTUGAL
Rest of world INTERNATIONAL
South Africa S. AFRICA
Spain ESPAÑA
Sweden SVERIGE
Switzerland SCHWEIZ
Turkey TURKEY
UK U.K.
Uruguay AMERICA LATINA
Venezuela AMERICA LATINA
5. To confirm the setting, press the key:
6. To complete the procedure, press the key:
note
If you subsequently want to change these settings, press
+ and repeat the procedure from the start, remembering
always to confirm the settings made by pressing the button.