Olivetti Fax-Lab S95, Instructions Manual

Page: 31 / 56

7
If you lift the receiver before the fax machine connects to the
telephone line and you hear the dialling tone, proceed as
follows:
1. Press the key:
2. Hang up.
note
Any kind of reception may be stopped by pressing the key.
The fax machine then returns to its initial stand-by mode.
T
O SET ONE
-
TOUCH AND SPEED DIALLING
The fax machine is also capable of carrying out quick dialling
procedures, such as one-touch dialling and speed dialling , but
these functions must be duly set.
O
NE
-
TOUCH DIALLING
You can assign each of the 10 numeric keys ( 0 - 9 ) a fax
number or a telephone number and a name which will
be dialled automatically when you press this key for more
than a second.
1. Press the key
until the display shows:
FAX SET-UP
2. Press the key:
The display shows:
DATE AND TIME
3. Press the key
until the display shows:
ONE TOUCH DIAL
4. Press the key:
The display shows:
TYPE ONE TOUCH
KEY: 0-9
5. Press the numeric key to which you want to assign the
telephone number or the fax number (for example, ).
- The display shows:
1:TEL NO.
If a fax number or a telephone number has already been
saved, the display will show it.
6. Dial your correspondent’s telephone or fax number (max.
64 digits).
To do this, press the keys:
-
7. If there are any incorrect numbers, move the cursor on the
incorrect number.
To do this, press the keys:
|
/
}
8. Then overwrite the number with the correct one.
To do this, press the keys:
-
9. To delete the number completely, press the key:
10. If your fax machine is connected to a private line and you
have selected the "FLASH" dialling mode, access the pub-
lic line, before dialling the number, by pressing the key:
A letter " E " (external) appears on the display.
11. To confirm the setting, press the key:
The display shows:
1:NAME
If a name has already been saved, the display will show it.
12. Enter the correspondent's name (max. 16 characters) as
you did for your name (see "
All that is missing now is
your name and fax number ", chapter " How to get
started quickly ").
To do this, press the keys:
-
13. If there are any incorrect characters, move the cursor on
the incorrect character.
To do this, press the keys:
|
/
}
14. Then overwrite the character with the correct one.
To do this, press the keys:
-
15. To delete the name completely, press the key:
16. To confirm the setting, press the key:
The display shows:
EDIT ANOTHER YES
At this point, you can abort the procedure or you can
program another one-touch dialling key .
17. To abort the procedure, press the key:
18. To set another one-touch dialling key, repeat the procedure
from the steps in which the correspondent’s number and
name are entered.