Olivetti d-COPIA 1801 MF, Operation Manual

Page: 183 / 215

9-14
Troubleshooting > Troubleshooting
S
T
U
Replace all originals and
press Start key.
―
Remove originals from the document
processor, put them back in their original
order, and place them again. Press the
[
OK ] key to resume printing. Press the
[ Stop ] key to cancel the job.
―
Replace MK.
―
Replacement of the parts in the
maintenance kit is necessary at every
150,000 pages of printing and requires
professional servicing. Contact your
Service Representative.
―
Restricted by Job
Accounting. (Print)
―
This job is canceled because it is
restricted by job accounting. Press the
[
OK ] key.
―
Restricted by Job
Accounting. (Scan)
―
This job is canceled because it is
restricted by job accounting. Press the
[
OK ] key.
―
Message Display Checkpoints Corrective Actions
Reference
Page
Scanner memory is full.
―
Scanning cannot be performed any
more due to insufficient memory of
scanner. Press the [
OK ] key to cancel
the job.
―
Set another cassette. Have you selected Offset? To use offsetting, the same size of paper
as the selected paper source must be
loaded in a different orientation in a
different paper source. page 5-19
Shake the toner container.
―
Open the front cover of the machine and
pull out the toner container. Shake the
toner container well and reinstall it. page 9-3
Message Display Checkpoints Corrective Actions
Reference
Page
Toner is low.
(Replace when empty.)
―
It is almost time to replace the toner
container. Obtain a new toner container.
―
Message Display Checkpoints Corrective Actions
Reference
Page
Unknown toner installed.PC Does the installed toner container's
regional specification match the
machine's? Install the specified toner container. page 9-3
Message Display Checkpoints Corrective Actions
Reference
Page