Olivetti d-COPIA 1801 MF, Operation Manual

Page: 80 / 215

4-9
Printing from PC > Using Print Box
Saving Document to a Print Box
Use the procedure below to save a document in the Print Box created on the Host PC. Print Box can be selected
from [
Box 01 ] to [ Box 10 ]. To use the other boxes or to change the default box name, configure the settings on
Client Tool. Refer to Default Settings on the PC Client Tool) on page 7-16 .
In addition, a PIN code can be set for a Print Box. Since the PIN code must be entered when printing at the machine,
security is enhanced.
1
Start Client Tool on the Host PC.
Refer to Accessing Client Tool on page 2-18 .
2
Display the screen on your PC.
1
Click [ File ] and select [ Print ] in the application.
2
Select the machine from the "Name" menu and click the [ Properties ] button.
3
Select the [ Job ] tab.
3
Configure the settings.
1
Select [ Print Box ] then select the Print Box where the print job should be stored from the
[ Box 1 ] to [ Box 10 ].
2
As necessary, set the job name for the print job.
4
Start printing.
Select [ OK ] to return to the "Print" screen and click [ OK ] to start storing.
NOTE
Note that the same job name is set and the job is overwritten if [ Custom ] and [ Replace
existing file ] are set.