Olivetti d-color MF551, Function Manual

Page: 23 / 75

d-Color MF651/551 3-9
3.2 Installation using Add Printer Wizard
3
19
Follow the instructions on the pages that follow.
% If the "Windows logo testing" or "Digital Signature" window appears, click the [Continue Anyway]
button.
% If both "RAW Port Number" and "LPD Setting" are enabled in the network settings for this machine,
check the enabled port, and then change it if necessary. For details, refer to the "User's Guide [Print
Operations]".
20
After finishing the installation, make sure that the icon for the installed printer is displayed in the
"Printers and Faxes" window.
21
Remove the DVD-ROM from the DVD-ROM drive.
This completes the fax driver installation.
3.2.4 Windows 2000/NT 4.0
Reference
- Installing the driver to Windows 2000/NT 4.0-based computers requires the administrator authority.
1
Insert the printer driver DVD-ROM into the DVD-ROM drive of the computer.
2
Click the [Start] button, and then select "Settings" - "Printers".
3
Double-click the "Add Printer" icon.
"Add Printer Wizard" starts.
4
Follow the instructions on the pages that follow.
5
On the page for specifying how the printer is attached, select "Local printer".
6
Click the [Next] button.
A page for selecting a port appears.
7
Click "Create a new port", and then select "Standard TCP/IP Port" as the type of port.
% In Windows NT 4.0, from the "Available Printer Ports" list, select "LPR Port", and then click [New
Port]. For details, refer to the "User's Guide [Print Operations]".
8
Click the [Next] button.
"Add Standard TCP/IP Printer Port Wizard" starts.
9
Click the [Next] button.
10
In the "Printer Name or IP Address" box, enter the IP address for this machine, and then click the [Next]
button.
% If the "Additional Port Information Required" dialog box appears, go to Step 11.
% If the "Finish" screen appears, go to Step 14.
11
Select "Custom", and then click the [Settings] button.
12
Change the settings according to the port, and then click the [OK] button.
% For LPR connection, select "LPR", and then enter "Print" in the "Queue name" box.
% You must discriminate between upper and lower case letters when entering it.
% For Port9100, select "Raw", and then enter a RAW port number (initial setting: "9100") in the "Port
Number" box.
13
Click the [Next] button.
14
Click the [Finish] button.
"Add Printer Wizard" appears.
15
Click the [Have Disk] button.