Olivetti d-color MF551, Function Manual

Page: 14 / 75

Setup procedures
2
2-6 d-Color MF651/551
2.3
2.3 Setup procedures
Before you can use this printing system, you must complete the setup.
The setup refers to a series of procedures for connecting this machine to the computer and installing the fax
driver to the computer.
Perform the setup using the following procedures.
2.3.1 For network connection
d
Reference
For details on connecting this machine to the computer, refer to "User's Guide [Print Operations]".
When updating an existing fax driver, uninstall it first. For details, refer to page 3-14.
For network connection, this manual only covers setup procedures for connecting through LPR/Port9100
(you use the Add Printer wizard to install the driver). For details on other setup procedures, refer to the "User's
Guide [Print Operations]".
1
Connect this machine to the computer.
2
Check that the computer to be used is connected to the network.
3
Specify the IP address of this machine, and then connect it to the network.
4
Change the network settings for this machine according to the connection method or protocol.
% LPR: In "LPD Setting", enable LPD printing.
% Port9100: In "TCP/IP Settings", enable the RAW port number (initial setting: "9100").
% SMB: Configure settings of "Print Settings" in "SMB Settings".
% IPP/IPPS: In "IPP Setting", enable IPP printing.
5
Install the fax driver.
% Specify the network port for the fax driver according to the connection method or protocol.
2.3.2 For local connection
1
Connect this machine to the computer.
2
Install the fax driver.