Oliver 1808-CE, User'S Operating And Instruction Manual

Page: 7 / 63

1808-CE
1808S20017 2-3
Heater roll will heat until
any
of the following conditions are met.
Power supply interrupted
*Heater roll selector is in the
“O” off position
*Emergency stop pushbutton depressed
Circuit breaker is in tripped (open) condition
Fuses opened due to short circuit and/or over-current
*Safety limit switch de-activated
– In-feed gate displaced
*Interlock (Reset) circuit activated
Conveyor will operate until
any
of the following conditions are met.
Power supply interrupted
Roll in raised position (operating handle in idle position)
*Emergency stop pushbutton depressed
Circuit breaker is in tripped (open) condition
Fuses opened due to short circuit and/or over-current
*Safety limit switch de-activated
– In-feed gate displaced
*Interlock (Reset) circuit activated
* = requires operator action
DECOMMISIONING STATEMENT
Please dispose of all materials as suggested in the appropriate MSDS reports at the end
of this manual, and as required by your state and local regulations.
Remember to always recycle when possible
.
RECYCLE