Oliver 1808-CE, User'S Operating And Instruction Manual

Page: 18 / 63

1808-CE
1808S20019 5-5
(
“OPERATING THE MACHINE” CONTINUED)
The machine is started by lifting the operating handle and pressing the START
“I”
pushbutton. This should be done in a swift manner which allows the heat seal roll to
come into contact with tray and film quickly as the conveyor starts moving. This
procedure prevents voids in the seal area during and stopping. Also, when lowering the
handle to stop the machine, it should be done in swift manner as well.
CAUTION
Avoid leaving the heater roll in the lowered position with the conveyor not
moving. This will cause damage to the machine and any trays that are under the
heated roll.
LIFT HERE, THEN PRESS
“START” PUSHBUTTON TO
START CONVEYOR
NOTE:
HANDLE SHOWN IN DOWN POSITION
Reset Pushbutton
Start Pushbutton
Operating Handle
E-Stop
Pushbutton
Heated Roll
On/Off Selector
Switch