5699-E P-43
SECTION 3 OPERATION (OF CNC LATHE)
ATC Continuous Operation Sequence
ATC Sequence
LE11214R0100500300001
- B code .......... Operation to return the tool on the arm and mount the specified tool in the arm
- M06
.......... Operation to switch a tool on the arm with the one in the spindle
1. Index magazine
2. Clamp tool in the sub-arm
3. Remove tool in the sub-arm
4. Advance sub-arm
5. Unlock middle-arm pot
6. Mount tool in the sub-arm
7. Lock middle-arm pot
8. Retract sub-arm; Unclamp tool in the sub-arm
9. Position the middle-arm to the ATC position
10. Send ATC arm to magazine stand-by position
11. Unlock middle-arm pot
12. Lower ATC arm
13. Send ATC arm from the magazine position to the stand-by position
14. Lock middle-arm pot
15. Raise ATC arm
16. Open ATC shutter (including M-spindle home position 1 lock)
17. Send ATC arm to the spindle position
18. Unclamp tool in the M-spindle (including M-spindle tool air blow on)
19. Lower ATC arm
20. Rotate ATC arm by 180
°
21. Raise ATC arm
22. Clamp tool in the M-spindle (including M-spindle tool air blow off)
23. Send ATC arm to the stand-by position
24. Close ATC shutter
25. Index magazine
26. Lower ATC arm
27. Send ATC arm to the magazine position
28. Unlock middle-arm pot
29. Raise ATC arm
30. Lock middle-arm pot
31. Send ATC arm to the stand-by position
32. Position middle-arm to the magazine position
33. Advance sub-arm; Clamp tool in the sub-arm
34. Unlock middle-arm
35. Remove tool in the sub-arm
36. Retract sub-arm
37. Lock middle-arm pot
38. Mount tool in the sub-arm
39. Unclamp tool in the sub-arm
Part of B code
M06
Part of B code
