5699-E P-40
SECTION 3 OPERATION (OF CNC LATHE)
ATC Magazine Tool Interference (Example Tool Installation) for 60-tool Magazine
When using tools such as rotary tools, turning tools, and angle head tools in the magazine next to
each other, make sure that tools fit within areas indicated with hatching in the drawing. For heavy
tools, distribute them well considering the weight balance.
Note
LE11214R0100500260001
If storing an Okuma turning tool holder, store milling holders of
φ
120 (4.72) or less in the
adjacent pots to avoid interference. Do not mount side-thru (having oil holes) type holders
next to the turning tool holders.
Drill holder
(Diameter must be
φ
120 (4.72) or less)
Interference occurs.
Unit: mm (in.)
OD turning tool holder
φ
300 (11.81)
(w/o adjacent tools)
End face turning tool holder
φ
120 (4.72)
(Turning tool holder)
φ
170 (6.69)
The drawing shows the front view of the ATC magazine.
