OKM eXp 4500 User Manual Download Page 54

Page: 54 / 94

Operating Modes

7.1.2 Browse Ground Scans

After selecting the "Browse Ground Scans" function with the multi-function control knob, you will see a

list of the stored scans, as represented in figure 7.7.

Select the measurement which you like to see by rotating

the multi-function control knob. Depress the knob to select
the measurement. For the selected measurement the

following options represented in figure 7.8 are provided.

•

View Ground Scan (Detail)

The selected measurement will be

displayed and built line for line as the
scan was taken. To speed up the viewing

process, rotate the multi-function control

knob.

•

View Ground Scan (Quick View)

The selected measurement will be

displayed immediately and will not show
the building of the data line for line.

•

Delete Ground Scan

The current selected measurement will be
deleted, if you confirm the following

message with “Yes”. Following you will go
back to the main menu.

•

Back

You go back to main menu.

OKM GmbH

www.okmmetaldetectors.com

Illustration 7.7: Select Stored Measurement

Illustration 7.8: Submenu: Browse Scans

Summary of Contents for eXp 4500































































































Search results

Summary of Contents for eXp 4500

Reviews:

Related manuals for eXp 4500

Brands by name

Popular brands

OKM eXp 4500, User Manual

Search results

Summary of Contents for eXp 4500

Reviews:

Related manuals for eXp 4500

Brands by name

Popular brands