OKM eXp 4500, User Manual

Page: 70 / 94

70 Operating Modes
7.5.6 Determining Position of Anomaly
After an anomaly has been found it is very important to know how to find the location. This is done very
simply by entering in the field length into the “Characteristics” window (F9 key).
After the length has been entered into the system, you can navigate to the desired position using the
arrow keys on the keyboard.
In Illustration 7.31: Position of anomaly with distance you can see in the bottom left hand corner the
distance is being shown. The beginning of a scan is normally always on the bottom right hand side of the
software window. The positioning line was put into place using the arrow keys. Afterward the signal
position can be found using simple distance measuring tools.
OKM GmbH
www.okmmetaldetectors.com
Illustration 7.31: Position of anomaly with distance