6.OSD - Patterns, Tours
6.OSD - Zones and Privacy Mask
PATTERNS
Pattern
Pattern records the user’s operation steps on
performing PTZ control and stores as a track. The
high speed dome series can record up to 4 tracks
with max. 180 sec. each.
PATTERN NUMBER:
Selects the pattern number, from 1
to 4
PROGRAM PATTERN:
Starts recording the pattern
when selected. you can perfome PTZ movement for
recording and shall not exceed 180 sec. Press IRIS-
OPEN to save the track.
RUN PATTERN:
Starts the current pattern
CLEAR PATTERN:
Delete curretn pattern.
EDIT PATTERN LABEL :
Sets the name for current
pattern.
PATTERN NUMBER 1
PROGRAM PATTERN
RUN PATTERN
CLEAR PATTERN
EDIT PATTERN LABEL
BACK
EXIT
Tour
Tour is an auto-run through selected preset
points with definable pause time. A tour can
store up to 32 presets points.
TOUR DWELL:
pause time for every stop on the
preset points. selectable between 000-255(s).
TOUR PRESETS:
press IRIS-OPEN Key on the
keyboard device to enter the preset point
selection. Move the joystick with up and down to
select the preset points by number and save the
setting with IRIS-OPEN key. with IRIS-CLOSE
key you can move to the previous selection. If a
select point has the value 0, all the following
presets points will be ignored.
RUN TOUR:
Starts the tour and exit the OSD
menu.
EDIT TOUR
TOUR DWELL 001
00-00-00-00-00-00-00-00
00-00-00-00-00-00-00-00
00-00-00-00-00-00-00-00
00-00-00-00-00-00-00-00
RUN TOUR
BACK
EXIT
Zone
to up to 8 zones with individual label. When the
display setting “Zone Label” is activated, the
label will be displayed on the operation screen.
The definition of the zones should not be
overlapped.
ZONES NUMBER:
Current zone selection
SET LEFT LIMIT:
Left limit of the current zone
SET RIGHT LIMIT:
Right limit of the current zone
CLEAR ZONE:
Delet the current zone
EDIT ZONE LABEL :
change the laben of current
zone.
You can define the zones in the whole PT range up
ZONES
ZONES NUMBER 1
SET LEFT LIMIT
SET RIGHT LIMIT
CLEAR ZONE
EDIT ZONE LABEL
BACK
EXIT
Some products may not be available in your country, please contact our distributor for more details
Some products may not be available in your country, please contact our distributor for more details
17
18
TIME RUNNING
DAY
SUN
TIME CHANNEL 1
START TIME 00:00
END TIME
00:00
RUNNING
NONE
BACK
EXIT
Time Running
You can set up the timer to start a function like
preset, tour or pattern. Each day can be set 4
action.
AUTO TRACKING
DAY
SUN
STATE
ON
START TIME 00:00
END TIME
00:00
SENSITIVE
LOW
TRACKING-ZOOM OFF
SET LEFT LIMIT
SET RIGHT LIMT
BACK
EXIT
AUTO TRACKING
Auto-Tracking can seach people or object with
high speed and low light performance.
DAY:
set current day
STATE: activate AUTO-TRACKING on this day
START TIME: set the time for activation
END TIME: set the time for stop the tracking
SENSITIVE: set the sensitivity for the detection
TRAKING ZOOM: activate auto-zoom
SET LIMIT: set the max. angle for the tracking.
