background image

4.INSTALLATION

Connector description

The wiring cable of the PTZ camera provides connectors for power supply, video and 
I/O interface

Video output
BNC

Inner Conn:
Outer Conn: Ground

Video Output to monitor or DVR

Using optional accessories

The speed dome cameras can be connected to various optional accessories through 
the standard connector types, which simplifiy the cable handling and avoids possible 
mistakes. All accessories are tested for max. compatibility and best performance.

Outdoor power adaptor box
AC 230V to AC 24V

AC 24 Power
 supply

RS 485

Alarm I/O

AC 230V
Power input

Indoor power adaptor
AC 230V to AC 24V

AC 230V

Power input

AC 24 Power supply

3-Axis keyboard
 controller

RS 485

Telemetric control
camera setup

21”High Res.
security Monitor.

Professional Real-time
16 Channel DVR

Video signal

RS 485 cable

The telemetric control of the appliance uses Rs485  serial communication with half-
duplex transmission technology.
Depends on the cable typeand baud rate, the transmission distance could vary. The 
following table shows max. distances based on cable with 0,56mm (24AWG) twisted 
pair:

2400 bps

1100 m

700m

4oom

4800 bps

1700m

9600 bps

19200 bps

Baud Rate

Max. Distance

Due the environmental interferences, such as  
eletromagnetic and induction fields, or number of 
connected appliance on the RS-485 bus, the 
transmission range may be less, e.g with cable thinner 
than  than 24AWG.

4.INSTALLATION

5

6

Power 
Connector

RS485 
Connector
RJ-11

Alarm I/O 1

RED: AC 24V
BLACK: AC 24V

To power supply

Green:RS485+
Yellow:RS485-

To Keyboard or DVR decives for 
telemetric control

RED: Alarm in  1
PINK: Alarm in  2
YELLOW: Alarm in  3
GREEN: Alarm in  4
BLACK: COM
WHITE: Alarm output - N.O
BLUE: Alarm output - N.C

AQUA

Alarm output - N.C2

BROWN: Alarm output - N.O2
GRAY: Alarm in  7
PURPLE: Alarm in  6
ORANGE: Alarm in  5

or control devices

I/O interface to additional alarm sensor 

Alarm I/O 2

Some products may not be available in your country, please contact our distributor for more details

Some products may not be available in your country, please contact our distributor for more details

Summary of Contents for SP27HB-V55DN
















Reviews: