OKIDATA Pacemark 3410, Service Manual

Page: 89 / 249

Page: 55
Service Guide PM3410
Chapter 3 Maintenance & Disassembly
3.2.21 Head Cable Assembly
1. Detach the printhead
(3.2.01)
2. Remove the ribbon cartridge bracket (3.2.19).
3. Loosen the two mounting screws (1), detach the tabs from the frame and remove the cable holder (2).
The tabs must be accessed from the bottom of the printer mechanism.
4. Remove the mounting screw (3) and detach the connector clamp (4).
5. Detach the head cable connector (5) from the carriage frame (6).
6. Slide the carriage to the left side frame. While lifting the front end of the printer mechanism, remove the
head cable assembly (7) by pulling downward.
P/N 56624901 Cable: Head Assembly RSPL B.2.05